See What Ghost Immobiliser Problems Tricks The Celebs Are Making Use Of

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft by using the Ghost Immobiliser. It's discreet and doesn't require additional key fobs.

The device uses existing buttons in your vehicle (steering wheel doors, door panels and centre console) to create a unique changeable pin code sequence of up to 20 presses. This then authorizes the startup of your vehicle.

Simple PIN Code Change Process

With the increasing rate of vehicle theft, a lot of owners are looking to improve their security. There are a myriad of security products that are available, from tracking systems to alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. A tracking system can assist you in locating your car if it is stolen, but it will not stop the crime. Immobilisers, in contrast, do exactly what they say on the tin - they disable your car's motor so that it can't be started. The Autowatch Ghost immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to steal your car.

Using the existing buttons in your car, the ferrari ghost installer device creates a unique sequence which must be entered before the engine starts. This can be accomplished using the indicator stalk or window buttons. In addition to this, there is also an app on mobile that can act as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is especially useful when you need to hand your car over for valet parking or maintenance, as the immobiliser will remain active and not deactivated.

The ghost installations review is a truly unique and ingenious device that works in conjunction with the buttons in your vehicle instead of being a separate device. It's not just an effective deterrent for vehicle theft and vandalism, but it can be used on future vehicles you own. This makes it a much better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser is an advanced security system that protects your car from key cloning, hacking & ECU swapping. It is a weatherproof tiny device that communicates directly with your vehicle's ECU via the CAN data bus to shut down the engine. It can be installed in the vehicle without additional wiring and has been thoroughly tested to ensure compatibility with all vehicles. It is also indestructible to jamming devices which is a common technique used by thieves to get around existing immobilisers.

The benefit of using CAN data is that it operates in a silent manner compared to traditional systems. It isn't detected by sophisticated RF scanning or code-grabbing technology and is also undetectable by conventional diagnostic tools. The Autowatch Ghost 2 immobiliser does not produce LED indicators and instead uses the buttons in your vehicle like the steering wheel or centre console panels to create a unique, customizable disarm sequence. You can create a sequence that is up to 20 presses long for added security. The iPhone app is limited to one connection, using a unique pairing code for the Ghost. All communication between the two devices is secured.

The bmw x6 ghost installer also prevents car thieves from adding the key to a new car or replacing the ECU to bypass the immobiliser to start the engine. The engine can only be started when a valid PIN code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with specified parameters, such as a 30mph speed limit) so that you can give your car to a valet service for servicing without the need to enter a PIN code.

Tested for each vehicle

The Autowatch ghost immobiliser install is the first aftermarket immobiliser for CAN bus that connects to the existing wiring in your vehicle and connects to your engine control unit (ECU). The device intercepts electronic signals that block your car's system from running its normal startup routine until you input an individual passcode. The system can be turned off or on via your smartphone's app, without the need for additional wires.

Standard factory immobilisers in automobiles function through a transponder built into the key that sends an indication to the ECU. If the correct code is sent, the car will start however, if the transponder is replaced by one from another vehicle the immobiliser will not recognise it. This allows the vehicle to be started and stolen. The ghost immobiliser Problems immobiliser has been developed by an South African company at the forefront of vehicle security systems technology. It protects your car from hacking, key cloning and even key theft. Only by physically towing your car away from thieves could they get it, and they would still not be able to drive it.

Ghost utilizes the buttons of your vehicle including the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an unique PIN code that is changeable that must be entered prior to you can use your car. This is done without the need for additional hardware, such as a key-fob and can be up to 20 presses long. It is also inaccessible to diagnostic equipment and does transmit radio frequency signals, so thieves cannot use sophisticated RF scanners or code grabbing technologies to detect that a system has been installed.

Contrary to physical anti-theft devices such as clamps or wheel locks, Ghost is concealed within the vehicle, so it cannot be removed or disabled by thieves. It's even more difficult to get rid of from a car alarm which requires disarming with an action sequence. This makes it a perfect supplement to a GPS tracker that can assist in locating your car after it's been stolen.

Override of emergency PIN code

You don't have to go far on social media sites to find stories or even videos of vehicles that were stolen by car thieves using the latest technology tools available to them. This includes key-cloning devices and hacking tools that allow thieves to start the vehicle with your original keys.

Our Ghost immobiliser combats this and gives you an additional layer of protection to stop your vehicle from being stolen in the event of being targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel, and on the centre console. This unique PIN is entered in conjunction with your original key fob to stop the engine from starting. The unique override PIN can be found on the black card that you will receive following your installation and is easy to remember as there are no LED indicators.

The device is hidden within the vehicle's wiring and does not emit radio signals, which means it cannot be identified by modern thieves using diagnostic software that can detect the type of security system you have installed. This makes it a fantastic alternative to an alarm.

Contrary to most security systems, which have an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely with the use of a digital block of commands that is sent to both the ECU and the engine.

It is also possible to connect a separate analog immobiliser, alarm or tracker with these systems but this must be specified prior to installing the device. They are also service/valet mode-compatible and are a great alternative to a tracker you are taking your car in for an electrical fault at the dealer.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen with the owners' keys. With easy access to key cloning equipment & door lock pick sets it is now easier than ever for thieves to take your prized possessions. We've developed the Autowatch Ghost Immobiliser to combat this. It blocks your vehicle from being driven even if your keys have been copied.

It communicates directly with your car's ECU (Engine Control Unit) through the CAN data loop. It is completely silent, as it does not use radio frequencies or key fobs. It cannot be detected using diagnostics or any other hacking device. It also protects against adding a new key or replacing the ECU to bypass the system as only the correct PIN code will allow the engine to start.

The device is hidden in your car and is reached via the buttons on your steering wheel, the centre console, and door panels. A unique and changeable PIN code sequence that can be as long as 20 digits has to be entered prior to being able to start your vehicle.

This is the first aftermarket immobiliser CAN bus that has been created that will stop your car being moved away or even started without a PIN code being entered prior to. If you are driving away with the device arming the indicator will flash on your dashboard which will flash continuously for approximately 300m. Entering your PIN code will deactivate the anti-hijack. Your car will continue to function as normal. If you do not enter your PIN at this time the indication will keep flashing & will require another PIN code for every attempt to start your vehicle.